品牌索引
产品分类 > 小信号开关二极管> 瞬态电压抑制器TVS/ESD> 双极管二极管> 调谐二极管> 齐纳(稳压)二极管> 小信号肖特基二极管> 频带转换二极管> 中/高功率管> 射频PIN二极管> Sinterglass二极管> 整流器 > N沟道(N-Channel)> P沟道(P-Channel)> 双N沟道(Dual N-Channel)> 双P沟道(Dual P-Channel)> 双N和P沟道(Dual N and P-Channel)
|
产品介绍 XC9254R The XC9254R series is a group of synchronous-rectification type DC/DC converters with a built-in 0.42ΩP-channel MOS driver transistor and 0.52ΩN-channel MOS switching transistor, designed to allow the use of ceramic capacitors. Operating voltage range is from 2.0V to 6.0V. The XC9254R001 type has a fixed output voltage of 1.2V (accuracy: ±2.0%). The device provides a high efficiency, stable power supply with an output current of 600mA to be configured using only a coil and two capacitors connected externally. With the built-in oscillator, 1.2MHz is fixed internally. As for operation mode, the XC9254R series is automatic PWM/PFM switching control allowing fast response, low ripple and high efficiency over the full range of loads (from light load to heavy load). ,The soft start and current control functions are internally optimized. During stand-by, all circuits are shutdown to reduce current consumption to as low as 1.0μA or less. With the built-in UVLO (Under Voltage Lock Out) function, the internal P-channel MOS driver transistor is forced OFF when input voltage becomes 1.4V or lower. ,Two types of package SOT-25 and USP-6C are available The XC9254R series is a group of synchronous-rectification type DC/DC converters with a built-in 0.42ΩP-channel MOS driver transistor and 0.52ΩN-channel MOS switching transistor, designed to allow the use of ceramic capacitors. Operating voltage range is from 2.0V to 6.0V. The XC9254R001 type has a fixed output voltage of 1.2V (accuracy: ±2.0%). The device provides a high efficiency, stable power supply with an output current of 600mA to be configured using only a coil and two capacitors connected externally. With the built-in oscillator, 1.2MHz is fixed internally. As for operation mode, the XC9254R series is automatic PWM/PFM switching control allowing fast response, low ripple and high efficiency over the full range of loads (from light load to heavy load). ,The soft start and current control functions are internally optimized. During stand-by, all circuits are shutdown to reduce current consumption to as low as 1.0μA or less. With the built-in UVLO (Under Voltage Lock Out) function, the internal P-channel MOS driver transistor is forced OFF when input voltage becomes 1.4V or lower. ,Two types of package SOT-25 and USP-6C are available |
