• - 交流-直流(AC-DC)控制器和稳压器
• - 直流-直流(DC-DC)控制器、转换器和稳压器
• - 电压和电流管理
• - 通讯IC
• - 驱动器
• - 热管理

• - 时钟及数据分配
• - 标准逻辑

• - 放大器和比较器
• - 模拟开关
• - 数字电位计
• - 接口
• - EMI和RFI滤波器

• - EEPROM存储器
• - 非易失性只读存储器(NVRAM)
• - SRAM存储器

说明

The TUSB1105 and TUSB1106 universal serial bus (USB) transceivers are compliant with the Universal Serial Bus Specification Rev. 2.0. These devices can transmit and receive serial data at both full-speed (12-Mbit/s) and low-speed (1.5-Mbit/s) data rates. The TUSB1105 and TUSB1106 can be used as USB device transceivers or USB host transceivers.

The devices allow USB application-specific ICs (ASICs) and programmable logic devices (PLDs), with power-supply voltages from 1.65 V to 3.6 V, to interface with the physical layer (PHY) of the universal serial bus. They have an integrated 5-V to 3.3-V voltage regulator for direct powering via the USB supply VBUS.

The TUSB1105 allows single-ended and differential input modes selectable by a mode (MODE) input and is available in RGT and RTZ packages.

特性

• Compatible With Universal Serial Bus Specification Rev. 2.0
• Transmit and Receive Serial Data at Both Full-Speed (12-Mbit/s)
  and Low-Speed (1.5-Mbit/s) Data Rates
• Integrated Bypassable 5-V to 3.3-V Voltage Regulator for Powering
  Via USB V_BUS
• VBUS Disconnection Indication Through V_P and V_M
• Used as USB Device Transceiver or USB Host Transceiver
• Stable RCV Output During SE0 Condition
• Two Single-Ended Receivers With Hysteresis
• Low-Power Operation, Ideal for Portable Equipment
• Support I/O Voltage Range From 1.65 V to 3.6 V
• IEC-61000-4-2 ESD Compliant
  • ±9-kV Contact-Discharge Model
    (D+, D–, V_CC(5.0))
  • ±15-kV Human-Body Model
    (D+, D–, V_CC(5.0))
• TUSB1105 Available in Quad Flat No-Lead (QFN) Package; TUSB1106
  Available in QFN and Thin Shrink Small-Outline Package (TSSOP)
• APPLICATIONS
  • Mobile Phones
  • Personal Digital Assistants (PDAs)
  • Information Appliances (IAs)
  • Digital Still Cameras (DSCs)