• - 交流-直流(AC-DC)控制器和稳压器
• - 直流-直流(DC-DC)控制器、转换器和稳压器
• - 电压和电流管理
• - 通讯IC
• - 驱动器
• - 热管理

• - 时钟及数据分配
• - 标准逻辑

• - 放大器和比较器
• - 模拟开关
• - 数字电位计
• - 接口
• - EMI和RFI滤波器

• - EEPROM存储器
• - 非易失性只读存储器(NVRAM)
• - SRAM存储器

说明

The TS5A12301E is a single-pole double-throw (SPDT) analog switch that is designed to operate from 2.25 V to 5.5 V. The device offers a low ON-state resistance with an excellent channel-to-channel ON-state resistance matching, and the break-before-make feature to prevent signal distortion during the transferring of a signal from one path to another.

The device has excellent total harmonic distortion (THD) performance and consumes very low power. These features make this device suitable for portable audio applications. The control input (IN) pin can be connected to low-voltage GPIOs, allowing it to be controlled by 1.8-V signals.

The TS5A12301E has ±15-kV Air-Gap Discharge and ±8-kV Contact Discharge ESD protection for the COM port to GND, which make it compliant with the IEC Level 4 ESD standard (IEC 61000-4-2).

特性

• Low ON-State Resistance (0.75 Ω)
• Low Charge Injection
• Excellent ON-State Resistance Matching
• Isolation in Power-Down Mode, V ₊ = 0
• Specified Break-Before-Make Switching
• 2.25-V to 5.5-V Power Supply (V₊)
• 6-MΩ Input Pulldown Allows Control Input (IN) to Be Unconnected
• 1.8-V Compatible Control Input Threshold Indepedent of V₊
• Latch-Up Performance Exceeds 100 mA Per JESD 78, Class II
• ESD Performance Tested Per JESD 22
  • 3000-V Human-Body Model (A114-B, Class II)
  • 1000-V Charged-Device Model (C101)
• ESD Performance COM Port to GND
  • 8000-V Human-Body Model (A114-B, Class II)
  • ±8-kV Contact Discharge (IEC 61000-4-2)
  • ±15-kV Air-Gap Discharge (IEC 61000-4-2)
• APPLICATIONS
  • Cell Phones
  • PDAs
  • Portable Instrumentation