说明

The TS3USB30 is a high-bandwidth switch specially designed for the switching of high-speed USB 2.0 signals in handset and consumer applications, such as cell phones, digital cameras, and notebooks with hubs or controllers with limited USB I/Os. The wide bandwidth (750 MHz) of this switch allows signals to pass with minimum edge and phase distortion. The device multiplexes differential outputs from a USB host device to one of two corresponding outputs. The switch is bidirectional and offers little or no attenuation of the high-speed signals at the outputs. It is designed for low bit-to-bit skew and high channel-to-channel noise isolation, and is compatible with various standards, such as high-speed USB 2.0 (480 Mbps).

特性

• V_CC Operation at 3 V and 4.3 V
• 1.8-V Compatible Control-Pin Inputs
• I_OFF Supports Partial Power-Down-Mode Operation
• r_on = 10 Max
• r_on <0.35 Typ
• C_io(ON) = 7 pF Typ
• Low Power Consumption (1 µA Max)
• ESD Performance Tested Per JESD 22
  • 6000-V Human-Body Model (HBM)
    (A114-B, Class II)
  • 1000-V Charged-Device Model (C101)
  • 250-V Machine Model (A115-A)
• –3-dB Bandwidth = 955 MHz Typ
• Packaged in 10-pin TQFN (1.4 mm × 1.8 mm)
• APPLICATIONS
  • Routes Signals for USB 1.0, 1.1, and 2.0
  • Mobile Industry Processor Interface (MIPI) Signal Routing