• - 交流-直流(AC-DC)控制器和稳压器
• - 直流-直流(DC-DC)控制器、转换器和稳压器
• - 电压和电流管理
• - 通讯IC
• - 驱动器
• - 热管理

• - 时钟及数据分配
• - 标准逻辑

• - 放大器和比较器
• - 模拟开关
• - 数字电位计
• - 接口
• - EMI和RFI滤波器

• - EEPROM存储器
• - 非易失性只读存储器(NVRAM)
• - SRAM存储器

说明

The TLK6002 is a member of a portfolio of multi-gigabit transceivers, intended for use in ultra-high-speed bi-directional point-to-point data transmission systems. It is specifically intended for base station RRH (Remote Radio Head) application, but may also be used in other high speed applications. The TLK6002 supports a serial interface speed of 0.470 Gbps to 6.25 Gbps. Rate support includes all the CPRI and OBSAI rates (0.6144/0.768/1.2288/1.536/2.4576/3.072/4.9152/6.144 Gbps) using a single fixed reference clock frequency (either 122.88 MHz or 153.6 MHz).

TLK6002 20-bit parallel interface operates in 1.5V or 1.8V HSTL single-ended format. The 20-bit interface allows low speed signals on the parallel side and therefore enabling the use of low cost FPGA in the system design.

特性

• Dual Channel 470Mbps to 6.25Gbps Continuous/Multi-Rate Transceiver
• Supports all CPRI and OBSAI Data Rates
• Integrated Latency Measurement Function, Accuracy of ±814 ps
• CPRI/OBSAI Automated Rate Sense (ARS) Function
• Supports SERDES Operation, 8B/10B Data Modes (20-bit and 16-bit + Controls)
• 20-bit HSTL Single-Ended Parallel Data Interface (Integrated Source and
  End Termination)
• Shared or Independent Reference Clock per Channel
• Latency/Depth Configurable Transmit and Receive FIFOs.
• Loopback Capability (Serial and Parallel Side), OBSAI Compliant
• Supports Serial Retime Operation
• Supports PRBS (2⁷–1), (2²³ – 1) and (2³¹–1) and
  CRPAT Long/Short Generation and Verification
• Dual Power Supply: 1.0V Core, and 1.5V/1.8V I/O Nominal Supply
• Serial Side Three Tap Transmit De-emphasis and Receive Adaptive Equalization
  to Allow Extended Backplane Reach
• Programmable Output Swing on Serial Output
• Minimum Receiver Differential Input Thresholds of 100mV_dfpp
• Loss of Signal (LOS) detection (≤75 mV_dfpp)
• Interface to Back Plane, Copper Cables, or Optical Modules
• Hot Plug Protection
• JTAG; IEEE 1149.1 /1149.6 Test Interface
• MDIO; IEEE 802.3 Clause-22 Support