• - 交流-直流(AC-DC)控制器和稳压器
• - 直流-直流(DC-DC)控制器、转换器和稳压器
• - 电压和电流管理
• - 通讯IC
• - 驱动器
• - 热管理

• - 时钟及数据分配
• - 标准逻辑

• - 放大器和比较器
• - 模拟开关
• - 数字电位计
• - 接口
• - EMI和RFI滤波器

• - EEPROM存储器
• - 非易失性只读存储器(NVRAM)
• - SRAM存储器

说明

The TLK4120 is a four channel multi-gigabit transceiver used in high-speed bidirectional point-to-point data transmission systems. The TLK4120 supports an effective serial interface speed of 0.5 Gbps to 1.3 Gbps per channel, providing up to 1.17 Gbps of data bandwidth per channel.

The primary application of the TLK4120 is to provide high-speed I/O data channels for point-to-point baseband data transmission over controlled impedance media of approximately 50 . The transmission media can be printed-circuit board, copper cables, or fiber-optic cable. The maximum rate and distance of data transfer is dependent upon the attenuation characteristics of the media and the noise coupling to the environment.

The TLK4120 can also be used to replace parallel data transmission architectures by providing a reduction in the number of traces, connector pins, and transmit/receive pins.

特性

• Hot Plug Protection
• Quad 0.5 to 1.3 Gigabits Per Second (Gbps) Serializer/Deserializer
• Independent Channel Operation
• 2.5-V Power Supply for Low Power Operation
• Selectable Signal Preemphasis for Serial Output
• Interfaces to Backplane, Copper Cables, or Optical Converters
• Lock Indication and Sync Mode for Fast Initialization
• 18-Bit Parallel Busses for Flexible Interface Applications
• On-chip PLL Provides Clock Synthesis From Low-Speed Reference
• Receiver Differential Input Thresholds 200 mV Min
• Rated for Industrial Temperature Range
• Typical Power: 1150 mW at 1.3 Gbps
• Ideal for High-Speed Backplane Interconnect and Point-to-Point Data Link
• Internal Passive Receive Equalization
• Small Footprint 19 mm x 19 mm, 289 Ball PBGA Package

PowerPAD is a trademark of Texas Instruments.