• - 交流-直流(AC-DC)控制器和稳压器
• - 直流-直流(DC-DC)控制器、转换器和稳压器
• - 电压和电流管理
• - 通讯IC
• - 驱动器
• - 热管理

• - 时钟及数据分配
• - 标准逻辑

• - 放大器和比较器
• - 模拟开关
• - 数字电位计
• - 接口
• - EMI和RFI滤波器

• - EEPROM存储器
• - 非易失性只读存储器(NVRAM)
• - SRAM存储器

说明

The TL16C754B is a quad universal asynchronous receiver/transmitter (UART) with 64-byte FIFOs, automatic hardware/software flow control, and data rates up to 3 Mbps. The TL16C754B offers enhanced features. It has a transmission control register (TCR) that stores received FIFO threshold level to start/stop transmission during hardware and software flow control. With the FIFO RDY register, the software gets the status of TXRDY/RXRDY for all four ports in one access. On-chip status registers provide the user with error indications, operational status, and modem interface control. System interrupts may be tailored to meet user requirements. An internal loopback capability allows onboard diagnostics.

The UART transmits data sent to it from the peripheral 8-bit bus on the TX signal and receives characters on the RX signal.

特性

• ST16C654 Pin Compatible With Additional Enhancements
• Supports Up To 24-MHz Crystal Input Clock ( 1.5 Mbps)
• Supports Up To 48-MHz Oscillator Input Clock ( 3 Mbps) for 5-V Operation
• Supports Up To 32-MHz Oscillator Input Clock ( 2 Mbps) for 3.3-V Operation
• 64-Byte Transmit FIFO
• 64-Byte Receive FIFO With Error Flags
• Programmable and Selectable Transmit and Receive FIFO Trigger Levels for DMA and Interrupt Generation
• Programmable Receive FIFO Trigger Levels for Software/Hardware Flow Control
• Software/Hardware Flow Control
  • Programmable Xon/Xoff Characters
  • Programmable Auto-RTS\ and Auto-CTS\
• Optional Data Flow Resume by Xon Any Character
• DMA Signalling Capability for Both Received and Transmitted Data
• Supports 3.3-V or 5-V Supply
• Characterized for Operation From –40°C to 85°C
• Software Selectable Baud Rate Generator
• Prescalable Provides Additional Divide by 4 Function
• Fast Access 2 Clock Cycle IOR\/IOW\ Pulse Width
• Programmable Sleep Mode
• Programmable Serial Interface Characteristics