| 
            
            
                
                
                    
                      
                          | 
                        
                         产品名称:STM8TL53F4 
                        产品封装:TSSOP-20 
                        产品品牌:STMicroelectronics 
                        
                         PDF文档:下载 
                        
                        库  存:查看 
                        电  话:0755-83035811 
                        
                        
                         | 
                       
                     
                    产品介绍 
                    STM8TL53F4 
Features  
- Operating conditions 
- Operating power supply: 1.65 V to 3.6 V
  
- Temperature range: –40 °C to 85 °C
   
- Low power features 
- 4 low power modes: Wait, Active-halt with AWU (1 μA), Active-halt with ProxSense™ (10 μA with scan every 200 ms),Halt (0.4 μA)
  
- Dynamic power consumption: 150 μA/MHz
  
- Fast wakeup from Halt mode: 4.7 μs
  
- Ultralow leakage per I/O: 50 nA
   
- Advanced STM8 Core 
- Harvard architecture with 3-stage pipeline
  
- Max freq.16 MHz,16 CISC MIPS peak
   
- Memories 
- Up to 16 Kbytes of Flash program including up to 2 Kbytes of data EEPROM
  
- Error correction code (ECC)
  
- Flexible write and read protection modes
  
- In-application and in-circuit programming
  
 
- Clock management 
- Internal 16 MHz factory-trimmed RC
  
- Internal 38 kHz low consumption RC driving both the IWDG and the AWU
   
- Reset and supply management 
- Ultralow power, ultrasafe power-on reset/ power-down reset
   
- Interrupt management 
- Nested interrupt controller with software priority control
  
- Up to 22 external interrupt sources
   
- I/Os 
- Up to 23 with 22 mappable on external interrupt vectors
  
- I/Os with programmable input pull-ups, high sink/source capability
   
- ProxSense™ patented acquisition technology with up to 300 touch sensing channels (20 receiver/transmitter channels and 15 transmitter channels) supporting projected capacitive acquisition method suitable for proximity detection.
 
- Timers 
- Two 16-bit general purpose timers (TIM2 and TIM3) with up and down counter and 2 channels (used as IC, OC, PWM)
  
- One 8-bit timer (TIM4) with 7-bit prescaler
  
- Beeper timer with 1, 2 or 4 kHz frequencies
   
- Communication interfaces 
- SPI synchronous serial interface
  
- Fast I2C Multimaster/slave 400 kHz
  
- USART with fractional baud rate generator
   
- Development support 
- Hardware single wire interface module (SWIM) for fast on-chip programming and non intrusive debugging
  
- In-circuit emulation (ICE)
   
- 96-bit unique ID
     
                 
             
             |