• - 交流-直流(AC-DC)控制器和稳压器
• - 直流-直流(DC-DC)控制器、转换器和稳压器
• - 电压和电流管理
• - 通讯IC
• - 驱动器
• - 热管理

• - 时钟及数据分配
• - 标准逻辑

• - 放大器和比较器
• - 模拟开关
• - 数字电位计
• - 接口
• - EMI和RFI滤波器

• - EEPROM存储器
• - 非易失性只读存储器(NVRAM)
• - SRAM存储器

说明

The SN74CB3T16211 is a high-speed TTL-compatible FET bus switch with low ON-state resistance (r_on), allowing for minimal propagation delay. The device fully supports mixed-mode signal operation on all data I/O ports by providing voltage translation that tracks V_CC. The SN74CB3T16211 supports systems using 5-V TTL, 3.3-V LVTTL, and 2.5-V CMOS switching standards, as well as user-defined switching levels (see Figure 1).

The I/O port of this device has a pullup current source that maintains the output voltage at V_CC when the device is ON and the input is greater than or equal to V_CC – 1. Because of the pullup current source, the output voltage level may be less than V_CC when the operating frequency is low and the I/O port is connected to a pulldown resistor.

特性

• Member of the Texas Instruments Widebus™ Family
• Output Voltage Translation Tracks V_CC
• Supports Mixed-Mode Signal Operation On All Data I/O Ports
  • 5-V Input Down To 3.3-V Output Level Shift With 3.3-V V_CC
  • 5-V/3.3-V Input Down To 2.5-V Output Level Shift With 2.5-V V_CC
• 5-V Tolerant I/Os With Device Powered-Up or Powered-Down
• Bidirectional Data Flow, With Near-Zero Propagation Delay
• Low ON-State Resistance (r_on) Characteristics (r_on = 5 Typical)
• Low Input/Output Capacitance Minimizes Loading (C_io(OFF) = 5 pF Typical)
• Data and Control Inputs Provide Undershoot Clamp Diodes
• Low Power Consumption (I_CC = 70 µA Max)
• V_CC Operating Range From 2.3 V to 3.6 V
• Data I/Os Support 0 to 5-V Signaling Levels (0.8 V, 1.2 V, 1.5 V, 1.8 V, 2.5 V, 3.3 V, 5 V)
• Control Inputs Can be Driven by TTL or 5-V/3.3-V CMOS Outputs
• I_off Supports Partial-Power-Down Mode Operation
• Latch-Up Performance Exceeds 250 mA Per JESD 17
• ESD Performance Tested Per JESD 22
  • 2000-V Human-Body Model (A114-B, Class II)
  • 1000-V Charged-Device Model (C101)
• Supports Digital Applications: Level Translation, PCI Interface, Bus Isolation