• Single-Supply Voltage Translator
• Output Level Up to Supply V_CC CMOS Level
  • 1.8 V to 3.3 V (at V_CC = 3.3 V)
  • 2.5 V to 3.3 V (at V_CC = 3.3 V)
  • 1.8 V to 2.5 V (at V_CC = 2.5 V)
  • 3.3 V to 2.5 V (at V_CC = 2.5 V
• Schmitt-Trigger Inputs Reject Input Noise and Provide
  Better Output Signal Integrity
• I_off Supports Partial Power Down (V_CC = 0 V)
• Very Low Static Power Consumption:
  0.1 µA
• Very Low Dynamic Power Consumption:
  0.9 µA
• Latch-Up Performance Exceeds 100 mA Per JESD 78, Class II
• Pb-Free Packages Available: SC-70 (DCK)
  2 x 2.1 x 0.65 mm (Height 1.1 mm)
• More Gate Options Available at
• ESD Performance Tested Per JESD 22
  • 2000-V Human-Body Model
    (A114-B, Class II)
  • 1000-V Charged-Device Model (C101)

DESCRIPTION/ORDERING INFORMATION

The SN74AUP1T02 performs the Boolean function Y = A + B or Y = A • B with designation for logic-level translation applications with output referenced to supply V_CC.

AUP technology is the industry’s lowest-power logic technology designed for use in extending battery-life in operating. All input levels that accept 1.8-V LVCMOS signals, while operating from either a single 3.3-V or 2.5-V V_CC supply. This product also maintains excellent signal integrity (see Figure 1 and Figure 2).

The wide V_CC range of 2.3 V to 3.6 V allows the possibility of switching output level to connect to external controllers or processors.

Schmitt-trigger inputs (V_T = 210 mV between positive and negative input transitions) offer improved noise immunity during switching transitions, which is especially useful on analog mixed-mode designs. Schmitt-trigger inputs reject input noise, ensure integrity of output signals, and allow for slow input signal transition.

I_off is a feature that allows for powered-down conditions (V_CC = 0 V) and is important in portable and mobile applications. When V_CC = 0 V, signals in the range from 0 V to 3.6 V can be applied to the inputs and outputs of the device. No damage occurs to the device under these conditions.

The SN74AUP1T02 is designed with optimized current-drive capability of 4 mA to reduce line reflections, overshoot, and undershoot caused by high-drive outputs.