• - 交流-直流(AC-DC)控制器和稳压器
• - 直流-直流(DC-DC)控制器、转换器和稳压器
• - 电压和电流管理
• - 通讯IC
• - 驱动器
• - 热管理

• - 时钟及数据分配
• - 标准逻辑

• - 放大器和比较器
• - 模拟开关
• - 数字电位计
• - 接口
• - EMI和RFI滤波器

• - EEPROM存储器
• - 非易失性只读存储器(NVRAM)
• - SRAM存储器

说明

The SN65LVDS86A FlatLink™ receiver contains three serial-in 7-bit parallel-out shift registers and four low-voltage differential signaling (LVDS) line receivers in a single integrated circuit. These functions allow receipt of synchronous data from a compatible transmitter, such as the SN75LVDS81, '83, '84, or '85, over four balanced-pair conductors and expansion to 21 bits of single-ended low-voltage LVTTL synchronous data at a lower transfer rate.

When receiving, the high-speed LVDS data is received and loaded into registers at seven times the LVDS input clock (CLKIN) rate. The data is then unloaded to a 21-bit wide LVTTL parallel bus at the CLKIN rate. The SN65LVDS86A presents valid data on the falling edge of the output clock (CLKOUT).

特性

• 3:21 Data Channel Expansion at up to 178.5 Mbytes/s Throughput
• Suited for SVGA, XGA, or SXGA Display Data Transmission From Controller to Display With Very Low EMI
• Three Data Channels and Clock Low-Voltage Differential Channels In and 21 Data and Clock Low-Voltage TTL Channels Out
• Operates From a Single 3.3-V Supply
• Tolerates 4-kV Human-Body Model (HBM) ESD
• Packaged in Thin Shrink Small-Outline Package (TSSOP) With 20-Mil Terminal Pitch
• Consumes Less Than 1 mW When Disabled
• Wide Phase-Lock Input Frequency Range 10 MHz to 68 MHz
• No External Components Required for PLL
• Inputs Meet or Exceed the Standard Requirements of ANSI EIA/TIA-644 Standard
• Improved Replacement for the SN75LVDS86 and NSC DS90C364
• Improved Jitter Tolerance
• Qualified for Automotive Applications

FlatLink is a trademark of Texas Instruments.