• - 交流-直流(AC-DC)控制器和稳压器
• - 直流-直流(DC-DC)控制器、转换器和稳压器
• - 电压和电流管理
• - 通讯IC
• - 驱动器
• - 热管理

• - 时钟及数据分配
• - 标准逻辑

• - 放大器和比较器
• - 模拟开关
• - 数字电位计
• - 接口
• - EMI和RFI滤波器

• - EEPROM存储器
• - 非易失性只读存储器(NVRAM)
• - SRAM存储器

说明

The SN55LBC173 is a monolithic quadruple differential line receiver with 3-state outputs designed to meet the requirements of the EIA standards RS-422-A, RS-423-A, RS-485, and CCITT V.11. This device is optimized for balanced multipoint bus transmission at data rates up to and exceeding 10 million bits per second. The four receivers share two ORed enable inputs, one active when high, the other active when low. Each receiver features high input impedance, input hysteresis for increased noise immunity, and input sensitivity of ±200 mV over a common-mode input voltage range of 12 V to -7 V. Fail-safe design ensures that if the inputs are open circuited, the output is always high. The SN55LBC173 is designed using the Texas Instruments proprietary LinBiCMOS^TM technology that provides low power consumption, high switching speeds, and robustness.

特性

• Meets EIA Standards RS-422-A, RS-423-A, RS-485, and CCITT V.11
• Designed to Operate With Pulse Durations as Short as 20 ns
• Designed for Multipoint Bus Transmission on Long Bus Lines in Noisy Environments
• Input Sensitivity...±200 mV
• Low-Power Consumption...20 mA Max
• Open-Circuit Fail-Safe Design
• Pin Compatible With SN75173 and AM26LS32

LinBiCMOS is a trademark of Texas Instruments.