• - 交流-直流(AC-DC)控制器和稳压器
• - 直流-直流(DC-DC)控制器、转换器和稳压器
• - 电压和电流管理
• - 通讯IC
• - 驱动器
• - 热管理

• - 时钟及数据分配
• - 标准逻辑

• - 放大器和比较器
• - 模拟开关
• - 数字电位计
• - 接口
• - EMI和RFI滤波器

• - EEPROM存储器
• - 非易失性只读存储器(NVRAM)
• - SRAM存储器

说明

The Texas Instruments PCI2250 PCI-to-PCI bridge provides a high performance connection path between two peripheral component interconnect (PCI) buses. Transactions occur between masters on one PCI bus and targets on another PCI bus, and the PCI2250 allows bridged transactions to occur concurrently on both buses. The bridge supports burst-mode transfers to maximize data throughput, and the two bus traffic paths through the bridge act independently.

The PCI2250 bridge is compliant with the PCI Local Bus Specification, and can be used to overcome the electrical loading limits of 10 devices per PCI bus and one PCI device per expansion slot by creating hierarchical buses. The PCI2250 provides two-tier internal arbitration for up to four secondary bus masters and may be implemented with an external secondary PCI bus arbiter.

特性

• Configurable for PCI Power Management Interface Specification Revision 1.0 or 1.1 support
• Compact-PCI friendly silicon as defined in the Compact-PCI Hot Swap Specification
• 3.3-V core logic with universal PCI interface compatible with 3.3-V and 5-V PCI signaling environments
• Two 32-bit, 33-MHz PCI buses
• Provides internal two-tier arbitration for up to four secondary bus masters and supports an external secondary bus arbiter
• Burst data transfers with pipeline architecture to maximize data throughput in both directions
• Provides programmable extension windows and port decode options
• Independent read and write buffers for each direction
• Provides five secondary PCI clock outputs
• Predictable latency per PCI Local Bus Specification
• Propagates bus locking
• Secondary bus is driven low during reset
• Provides VGA palette memory and I/O, and subtractive decoding options
• Advanced submicron, low-power CMOS technology
• Fully compliant with PCI-to-PCI Bridge Architecture Specification
• Packaged in 160-pin QFP (PCM) and 176-pin thin QFP (PGF)