品牌索引
产品分类 > 小信号开关二极管> 瞬态电压抑制器TVS/ESD> 双极管二极管> 调谐二极管> 齐纳(稳压)二极管> 小信号肖特基二极管> 频带转换二极管> 中/高功率管> 射频PIN二极管> Sinterglass二极管> 整流器 > N沟道(N-Channel)> P沟道(P-Channel)> 双N沟道(Dual N-Channel)> 双P沟道(Dual P-Channel)> 双N和P沟道(Dual N and P-Channel)
|
首 页 > 新闻动态 > 公司新闻 > 供应 PGA2500IDB TI SSOP28 数控 供应 PGA2500IDB TI SSOP28 数控FEATURES
Fully Differential Input-to-Output Architecture Digitally Controlled Gain Using Serial Port Interface: − Gain Range: 10dB through 65dB, 1dB per step − Unity (0dB) Gain Setting via Serial Port or Dedicated Control Pin Dynamic Performance: − Equivalent Input Noise with ZS = 150Ω and Gain = 30dB: −128dBu − Total Harmonic Distortion plus Noise (THD+N) with Gain = 30dB: 0.0004% Zero Crossing Detection Minimizes Audible Artifacts when Gain Switching Integrated DC Servo Minimizes Output Offset Voltage Common-Mode Servo Improves CMRR Four-Wire Serial Control Port Interface: − Simple Interface to Microprocessor or DSP Serial Ports − Supports Daisy-Chaining of Multiple PGA2500 Devices Dedicated Input Pin for Selecting Unity Gain Overload Output Pin Provides Clipping Indication Four General-Purpose Digital Output Pins Requires ±5V Power Supplies Available in an SSOP-28 Package APPLICATIONS Microphone Preamplifiers and Mixers Digital Mixers and Recorders DESCRIPTION The PGA2500 is a digitally controlled, analog microphone preamplifier designed for use as a front end for highperformance audio analog-to-digital converters (ADCs). The PGA2500 features include low noise, wide dynamic range, and a differential signal path. An on-chip DC servo loop is employed to minimize DC offset, while a common-mode servo function may be used to enhance common-mode rejection. The PGA2500 features a gain range of 10dB through 65dB (1dB/step), along with a unity gain setting. The wide gain range allows the PGA2500 to be used with a variety of microphones. Gain settings and internal functions are programmed using a 16-bit control word, which is loaded using a simple serial port interface. A serial data output pin provides support for daisy-chained connection of multiple PGA2500 devices. Four programmable digital outputs are provided for controlling the external switching of input pads, phantom power, high pass filters, and polarity reversal functions. The PGA2500 requires both +5V and −5V power supplies and is available in a small SSOP-28 package. |
