• - 交流-直流(AC-DC)控制器和稳压器
• - 直流-直流(DC-DC)控制器、转换器和稳压器
• - 电压和电流管理
• - 通讯IC
• - 驱动器
• - 热管理

• - 时钟及数据分配
• - 标准逻辑

• - 放大器和比较器
• - 模拟开关
• - 数字电位计
• - 接口
• - EMI和RFI滤波器

• - EEPROM存储器
• - 非易失性只读存储器(NVRAM)
• - SRAM存储器

说明

The ISO1050 is a galvanically isolated CAN transceiver that meets or exceeds the specifications of the ISO 11898 standard. The device has the logic input and output buffers separated by a silicon oxide (SiO₂) insulation barrier that provides galvanic isolation of up to 5000 V_RMS for DW Package and 2500 V_RMS for DUB package. Used in conjunction with isolated power supplies, the device prevents noise currents on a data bus or other circuits from entering the local ground and interfering with or damaging sensitive circuitry.

As a CAN transceiver, the device provides differential transmit capability to the bus and differential receive capability to a CAN controller at signaling rates up to 1 megabit per second (Mbps).

特性

• 5000-V_RMS Isolation (DW Package)
• 2500-V_RMS Isolation (DUB Package)
• Failsafe Outputs
• Low Loop Delay: 150 ns Typical
• 50 kV/µs Typical Transient Immunity
• Meets or Exceeds ISO 11898 requirements
• Bus-Fault Protection of –27 V to 40 V
• Dominant Time-Out Function
• IEC 60747-5-2 (VDE 0884, Rev. 2) & IEC 61010-1 Approved
• UL 1577 Double Protection Approved;
  See Regulatory Information section for details
• IEC 60950-1, IEC 60601-1 and CSA Approvals Pending
• 3.3-V Inputs are 5-V Tolerant
• Typical 25-Year Life at Rated Working Voltage
  (see Application Report SLLA197)
• APPLICATIONS
  • CAN Data Buses
  • Industrial Automation
    • DeviceNet Data Buses
    • CANopen Data Buses
    • CANKingdom Data Buses
  • Medical Scanning and Imaging