CY7C64013C-SXCT
Features
■ Full-speed USB Microcontroller
■ 8-bit USB Optimized Microcontroller
❐ Harvard architecture
❐ 6-MHz external clock source
❐ 12-MHz internal CPU clock
❐ 48-MHz internal clock
■ Internal memory
❐ 256 bytes of RAM
❐ 8 KB of PROM (CY7C64013C, CY7C64113C)
■ Integrated Master/Slave I2C-compatible Controller (100 kHz)
enabled through General-Purpose I/O (GPIO) pins
■ Hardware Assisted Parallel Interface (HAPI) for data transfer
to external devices
■ I/O ports
❐ Three GPIO ports (Port 0 to 2) capable of sinking 7 mA per
pin (typical)
❐ An additional GPIO port (Port 3) capable of sinking 12 mA
per pin (typical) for high current requirements: LEDs
❐ Higher current drive achievable by connecting multiple GPIO
pins together to drive a common output
❐ Each GPIO port can be configured as inputs with internal
pull-ups or open drain outputs or traditional CMOS outputs
❐ A Digital to Analog Conversion (DAC) port with
programmable current sink outputs is available on the
CY7C64113C devices
❐ Maskable interrupts on all I/O pins
■ 12-bit free-running timer with one microsecond clock ticks
■ Watchdog Timer (WDT)
■ Internal Power-On Reset (POR)
■ USB Specification Compliance
❐ Conforms to USB Specification, Version 1.1
❐ Conforms to USB HID Specification, Version 1.1
❐ Supports up to five user configured endpoints
• Up to four 8-byte data endpoints
• Up to two 32-byte data endpoints
❐ Integrated USB transceivers
■ Improved output drivers to reduce EMI
■ Operating voltage from 4.0 V to 5.5 V DC
■ Operating temperature from 0 to 70 degrees Celsius
❐ CY7C64013C available in 28-pin SOIC and 28-pin PDIP
packages
❐ CY7C64113C available in 48-pin SSOP packages
■ Industry-standard programmer support