• - 交流-直流(AC-DC)控制器和稳压器
• - 直流-直流(DC-DC)控制器、转换器和稳压器
• - 电压和电流管理
• - 通讯IC
• - 驱动器
• - 热管理

• - 时钟及数据分配
• - 标准逻辑

• - 放大器和比较器
• - 模拟开关
• - 数字电位计
• - 接口
• - EMI和RFI滤波器

• - EEPROM存储器
• - 非易失性只读存储器(NVRAM)
• - SRAM存储器

说明

The \x92FCT374T devices are high-speed, low-power, octal D-type flip-flops, featuring separate D-type inputs for each flip-flop. These devices have 3-state outputs for bus-oriented applications. A buffered clock (CP) and output-enable (OE\) inputs are common to all flip-flops. The eight flip-flops in the \x92FCT374T store the state of their individual D inputs that meet the setup-time and hold-time requirements on the low-to-high CP transition. When OE\ is low, the contents of the eight flip-flops are available at the outputs. When OE\ is high, the outputs are in the high-impedance state. The state of OE\ does not affect the state of the flip-flops.

These devices are fully specified for partial-power-down applications using I_off.

特性

• Function, Pinout, and Drive Compatible With FCT and F Logic
• Reduced V_OH (Typically = 3.3 V) Versions of Equivalent FCT Functions
• Edge-Rate Control Circuitry for Significantly Improved Noise Characteristics
• I_off Supports Partial-Power-Down Mode Operation
• Matched Rise and Fall Times
• Fully Compatible With TTL Input and Output Logic Levels
• ESD Protection Exceeds JESD 22
  • 2000-V Human-Body Model (A114-A)
  • 200-V Machine Model (A115-A)
  • 1000-V Charged-Device Model (C101)
• Edge-Triggered D-Type Inputs
• 250-MHz Typical Switching Rate
• CY54FCT374T
  • 32-mA Output Sink Current
  • 12-mA Output Source Current
• CY74FCT374T
  • 64-mA Output Sink Current
  • 32-mA Output Source Current
• 3-State Outputs