品牌索引
产品分类 > 小信号开关二极管> 瞬态电压抑制器TVS/ESD> 双极管二极管> 调谐二极管> 齐纳(稳压)二极管> 小信号肖特基二极管> 频带转换二极管> 中/高功率管> 射频PIN二极管> Sinterglass二极管> 整流器 > N沟道(N-Channel)> P沟道(P-Channel)> 双N沟道(Dual N-Channel)> 双P沟道(Dual P-Channel)> 双N和P沟道(Dual N and P-Channel)
|
产品介绍 AMIS-41682 Features
• Fully Compatible with ISO11898−3 Standard • Optimized for In−Car Low−speed Communication ♦ Baud Rate up to 125 kB ♦ Up to 32 Nodes can be Connected ♦ Due to Built−in Slope Control function and a very Good Matching of the CANL and CANH bus outputs, this device realizes a very low electromagnetic emission (EME) ♦ Fully Integrated Receiver Filters ♦ Permanent Dominant Monitoring of Transmit Data Input ♦ Differential Receiver with Wide Common−Mode Range for High Electromagnetic Susceptibility (EMS) in Normal− and Low−Power Modes ♦ True 3.3 V Digital I/O Interface to CAN Controller for AMIS−41683 Only • Management in Case of Bus Failure ♦ In the Event of Bus Failures, Automatic Switching to Single−Wire Mode, even when the CANH Bus Wire is Short−Circuited to VCC ♦ The Device will Automatically Reset to Differential Mode if the Bus Failure is Removed ♦ During Failure Modes There is Full Wake−up Capability ♦ Unpowered Nodes do not Disturb Bus Lines ♦ Bus Errors and Thermal Shutdown Activation is Flagged on ERR Pin • Protection Issues ♦ Short Circuit Proof to Battery and Ground ♦ Thermal Protection ♦ The Bus Lines are Protected Against Transients in an Automotive Environment ♦ An Unpowered Node Does not Disturb the Bus Lines • Support for Low Power Modes ♦ Low Current Sleep and Standby Mode with Wake−up via the Bus Lines ♦ Power−on Flag on the Output ♦ Two−Edge Sensitive Wake−up Input Signal via Pin WAKE • I/Os ♦ The unpowered chip cannot be parasitically supplied either from digital inputs or from digital outputs • These are Pb−Free Devices* |
