• - 交流-直流(AC-DC)控制器和稳压器
• - 直流-直流(DC-DC)控制器、转换器和稳压器
• - 电压和电流管理
• - 通讯IC
• - 驱动器
• - 热管理

• - 时钟及数据分配
• - 标准逻辑

• - 放大器和比较器
• - 模拟开关
• - 数字电位计
• - 接口
• - EMI和RFI滤波器

• - EEPROM存储器
• - 非易失性只读存储器(NVRAM)
• - SRAM存储器

说明

The AM26LV32, BiCMOS, quadruple, differential line receiver with 3-state outputs is designed to be similar to TIA/EIA-422-B and ITU Recommendation V.11 receivers with reduced common-mode voltage range due to reduced supply voltage.

The device is optimized for balanced bus transmission at switching rates up to 32 MHz. The enable function is common to all four receivers and offers a choice of active-high or active-low inputs. The 3-state outputs permit connection directly to a bus-organized system. Each device features receiver high input impedance and input hysteresis for increased noise immunity, and input sensitivity of ±200 mV over a common-mode input voltage range from -0.3 V to 5.5 V. When the inputs are open circuited, the outputs are in the high logic state.

特性

• Switching Rates up to 32 MHz
• Operates from a Single 3.3-V Supply
• Ultra-Low Power Dissipation...27 mW Typ
• Open-Circuit, Short-Circuit, and Terminated Fail-Safe
• -0.3-V to 5.5-V Common-Mode Range With ±200 mV Sensitivity
• Accepts 5-V Logic Inputs With a 3.3-V V_CC
• Input Hysteresis...50 mV Typ
• 235 mW With Four Receivers at 32 MHz
• Pin-to-Pin Compatible With AM26C32, AM26LS32, and MB570

LinIMPACT-C60 and TI are trademarks of Texas Instruments.