二极管

USB

三极管

可控硅(晶闸管)

场效应管(MOSFET)

集成电路

连接器

LED系列产品

电感器

继电器

传感器

电容器

电阻器

保护器件

光电器件

压电晶体

开关原件

功率模块

特性

• Meets or Exceeds Standard TIA/EIA-422-B and ITU Recommendation V.11
• Operates From a Single 3.3-V Power Supply
• ESD Protection for RS422 Bus Pins
  • ±15-kV Human-Body Model (HBM)
  • ±8-kV IEC61000-4-2, Contact Discharge
  • ±15-kV IEC61000-4-2, Air-Gap Discharge
• Switching Rates up to 32 MHz
• Low Power Dissipation: 27 mW Typ
• Open-Circuit, Short-Circuit, and Terminated Fail-Safe
• ±7-V Common-Mode Input Voltage Range With ±200-mV Sensitivity
• Accepts 5-V Logic Inputs With 3.3-V Supply (Enable Inputs)
• Input Hysteresis: 35 mV Typ
• Pin-to-Pin Compatible With AM26C32, AM26LS32
• I_off Supports Partial-Power-Down Mode Operation
• Package Options: SOP, SOIC, TSSOP, QFN

DESCRIPTION/ORDERING INFORMATION

The AM26LV32E consists of quadruple differential line receivers with 3-state outputs. These differential receivers have ±15-kV ESD (HBM and IEC61000-4-2, Air-Gap Discharge) and ±8-kV ESD (IEC61000-4-2, Contact Discharge) protection for RS422 bus pins.

This device is designed to meet TIA/EIA-422-B and ITU recommendation V.11 drivers with reduced supply voltage. The device is optimized for balanced bus transmission at switching rates up to 32 MHz. The 3-state outputs permit connection directly to a bus-organized system.

The AM26LV32E has an internal fail-safe circuitry that prevents the device from putting an unknown voltage signal at the receiver outputs. In the open fail-safe, shorted fail-safe, and terminated fail-safe, a high state is produced at the respective output.

This device is supported for partial-power-down applications using I_off. I_off circuitry disables the outputs, preventing damaging current backflow through the device when it is powered down.

The AM26LV32EI is characterized for operation from –40°C to 85°C.